CCST-NETWORKING NEW DUMPS SHEET, NEW CCST-NETWORKING EXAM QUESTION

CCST-Networking New Dumps Sheet, New CCST-Networking Exam Question

CCST-Networking New Dumps Sheet, New CCST-Networking Exam Question

Blog Article

Tags: CCST-Networking New Dumps Sheet, New CCST-Networking Exam Question, CCST-Networking PDF Guide, CCST-Networking Practice Exam Fee, CCST-Networking Latest Exam Review

P.S. Free 2025 Cisco CCST-Networking dumps are available on Google Drive shared by Actual4Cert: https://drive.google.com/open?id=13iSjopQIz9JEBpBWxrAaxZRLn9iO6dV7

As we all know, a lot of efforts need to be made to develop a CCST-Networking learning prep. Firstly, a huge amount of first hand materials are essential, which influences the quality of the compilation about the CCST-Networking actual test guide. We have tried our best to find all reference books. Then our experts have carefully summarized all relevant materials of the CCST-Networking exam. Also, annual official test is also included. They have built a clear knowledge frame in their minds before they begin to compile the CCST-Networking Actual Test guide. It is a long process to compilation. But they stick to work hard and never abandon. Finally, they finish all the compilation because of their passionate and persistent spirits. So you are lucky to come across our CCST-Networking exam questions.

Cisco CCST-Networking Exam Syllabus Topics:

TopicDetails
Topic 1
  • Diagnosing Problems: In the CCST-Networking exam, Cisco network technicians are tested on their ability to employ troubleshooting methodologies and help desk practices, perform packet captures with Wireshark, run and interpret diagnostic commands. It also tests their skills to differentiate data collection methods for network devices, and execute basic show commands on Cisco devices.
Topic 2
  • Standards and Concepts: The Cisco CCST-Networking exam assesses network technicians' knowledge of essential networking concepts, including identifying network building blocks, differentiating bandwidth from throughput, distinguishing various network types (LAN, WAN, MAN, CAN, PAN, WLAN), and comparing cloud versus on-premises services. It also measures understanding of common network applications and protocols.
Topic 3
  • Addressing and Subnet Formats: For aspiring Cisco network technicians, the CCST Networking exam evaluates the ability to compare private and public IP addresses, identify IPv4 addresses and subnet formats, and recognize IPv6 addresses and prefix formats. This ensures they can manage and configure network addressing effectively.

>> CCST-Networking New Dumps Sheet <<

2025 CCST-Networking New Dumps Sheet | 100% Free New Cisco Certified Support Technician (CCST) NetworkingExam Exam Question

The Cisco CCST-Networking web-based practice test software is very user-friendly and simple to use. It is accessible on all browsers. It will save your progress and give a report of your mistakes which will surely be beneficial for your overall exam preparation. A useful certification will bring you much outstanding advantage when you apply for any jobs about Cisco company or products.

Cisco Certified Support Technician (CCST) NetworkingExam Sample Questions (Q27-Q32):

NEW QUESTION # 27
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.

Which command should you use? Complete the command by selecting the correct options from each drop-down lists.

Answer:

Explanation:

Explanation:
To determine if you can reach the router, you should use thepingcommand followed by the IP address of the router. Thepingcommand is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in theipconfigresults is typically the router's IP address in a home or small office network. In this case, the Default Gateway is192.168.0.1, which is the address you would ping to check connectivity to the router.
References:=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use thepingcommand with the IP address of the router.
* Command:ping
* Target:192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in theipconfigoutput.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide


NEW QUESTION # 28
Which address is included in the 192.168.200.0/24 network?

  • A. 192.168.201.13
  • B. 192.168.1.13
  • C. 192.168.200.13
  • D. 192.168.199.13

Answer: C

Explanation:
*192.168.200.0/24 Network: This subnet includes all addresses from 192.168.200.0 to 192.168.200.255. The
/24 indicates a subnet mask of 255.255.255.0, which allows for 256 addresses.
*192.168.199.13: This address is in the 192.168.199.0/24 subnet, not the 192.168.200.0/24 subnet.
*192.168.200.13: This address is within the 192.168.200.0/24 subnet.
*192.168.201.13: This address is in the 192.168.201.0/24 subnet, not the 192.168.200.0/24 subnet.
*192.168.1.13: This address is in the 192.168.1.0/24 subnet, not the 192.168.200.0/24 subnet.
References:
*Subnetting Guide: Subnetting Basics


NEW QUESTION # 29
You need to connect a computer's network adapter to a switch using a 1000BASE-T cable.
Which connector should you use?

  • A. Coax
  • B. RJ-11
  • C. RJ-45
  • D. OS2 LC

Answer: C

Explanation:
*1000BASE-T Cable: This refers to Gigabit Ethernet over twisted-pair cables (Cat 5e or higher).
*Connector: RJ-45 connectors are used for Ethernet cables, including those used for 1000BASE-T.
*Coax: Used for cable TV and older Ethernet standards like 10BASE2.
*RJ-11: Used for telephone connections.
*OS2 LC: Used for fiber optic connections.
References:
*Ethernet Standards and Cables: Ethernet Cable Guide


NEW QUESTION # 30
Which command will display the following output?

  • A. show inventory
  • B. show ip interface
  • C. show mac-address-table
  • D. show cdp neighbor

Answer: D

Explanation:
The command that will display the output provided, which includes capability codes, local interface details, device IDs, hold times, and platform port ID capabilities, is the show cdp neighbor command. This command is used in Cisco devices to display current information about neighboring devices detected by Cisco Discovery Protocol (CDP), which includes details such as the interface through which the neighbor is connected, the type of device, and the port ID of the device1.
References :=
*Cisco - show cdp neighbors
The provided output is from the Cisco Discovery Protocol (CDP) neighbor table. The show cdp neighbor command displays information about directly connected Cisco devices, including Device ID, Local Interface, Holdtime, Capability, Platform, and Port ID.
*A. show mac-address-table: Displays the MAC address table on the switch.
*C. show inventory: Displays information about the hardware inventory of the device.
*D. show ip interface: Displays IP interface status and configuration.
Thus, the correct answer is B. show cdp neighbor.
References :=
*Cisco CDP Neighbor Command
*Understanding CDP


NEW QUESTION # 31
During the data encapsulation process, which OSI layer adds a header that contains MAC addressing information and a trailer used for error checking?

  • A. Data Link
  • B. Network
  • C. Transport
  • D. Session

Answer: A

Explanation:

OSI model
During the data encapsulation process, theData Link layerof the OSI model is responsible for adding a header that contains MAC addressing information and a trailer used for error checking.The header typically includes the source and destination MAC addresses, while the trailer contains a Frame Check Sequence (FCS) which is used for error detection1.
The Data Link layer ensures that messages are delivered to the proper device on a LAN using hardware addresses and translates messages from the Network layer into bits for the Physical layer to transmit. It also controls how data is placed onto the medium and is received from the medium through the physical hardware.
References:=
* The OSI Model - The 7 Layers of Networking Explained in Plain English
* OSI Model - Network Direction
* Which layer adds both header and trailer to the data?
* What is OSI Model | 7 Layers Explained - GeeksforGeeks


NEW QUESTION # 32
......

Our product’s passing rate is 99% which means that you almost can pass the test with no doubts. The reasons why our CCST-Networking Test Guide’ passing rate is so high are varied. Firstly, our test bank includes two forms and they are the PDF test questions which are selected by the senior lecturer, published authors and professional experts and the practice test software which can test your mastery degree of our Cisco Certified Support Technician (CCST) NetworkingExam study question at any time. The two forms cover the syllabus of the entire test. Our questions and answers include all the questions which may appear in the exam and all the approaches to answer the questions. So we provide the strong backing to help clients to help them pass the test.

New CCST-Networking Exam Question: https://www.actual4cert.com/CCST-Networking-real-questions.html

2025 Latest Actual4Cert CCST-Networking PDF Dumps and CCST-Networking Exam Engine Free Share: https://drive.google.com/open?id=13iSjopQIz9JEBpBWxrAaxZRLn9iO6dV7

Report this page